Sharp PDA SLシリーズのページ

SL-A300 の dmesg

SL-A300 の dmesg です。ダウンロード(SL-A300 の dmesg)


Linux version 2.4.13-ac5-rmk2-cotulla.1 (sharp@slhaya) (gcc version 2.95.2 19991024 (release)) #5 Fri Dec 6 12:53:06 JST 2002
Processor: Intel XScale-PXA210 revision 3
Architecture: Cotulla
fixup_cotulla:
discovery_init
initial MSCx...
Initial ASIC3...
On node 0 totalpages: 9216
zone(0): 17408 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=null root=/dev/mtdblock0
Relocating machine vectors to 0xffff0000
Console: color dummy device 80x30
Calibrating delay loop... 198.65 BogoMIPS
Memory: 32MB 4MB = 36MB total
Memory: 33912KB available (1732K code, 475K data, 84K init)
Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
XScale DMA initilized
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.14)
Starting kswapd v1.8
Console: switching to color frame buffer device 30x40
in collie_kbd_hw_init All_EDGE = 1
keyboard initilaized.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
Discovery serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0xf0200000x (irq = 21) is a 16550A
ttyS01 at 0xf0700000x (irq = 20) is a 16550A, using IRDA
rs_init: IRDA H/W initializaion
sharpled_init: done.
Cotulla Real Time Clock driver v1.00
Cotulla Touch Screen driver initialized
block: queued sectors max/low 21845kB/7281kB, 64 slots per queue
RAMDISK driver initialized: 16 RAM disks of 1024K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
loop: loaded (max 8 devices)
PPP generic driver version 2.4.1
PPP Deflate Compression module registered
PPP BSD Compression module registered
ide_cs.c 1.26 1999/11/16 02:10:49 (David Hinds)
Cotulla Sound Driver Installed
Discovery flash device: 1000000 at 0
0: offset=0x0,size=0x20000,blocks=128
Using static partision definition
Creating 1 MTD partitions on "Discovery-flash":
0x00160000-0x00fc0000 : "Filesystem"
Linux Kernel Card Services 3.1.22
options: [pm]
Cotulla PCMCIA (CS release 3.1.22)
virtual_io=0xF6000000, phy_attr=0x10000000, phy_mem=0x10800000
sa1100: initialization complete
Frontlight Driver Initialized.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 2048)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
IrCOMM protocol (Dag Brattli)
VFS: Mounted root (cramfs filesystem) readonly.
Freeing init memory: 84K
devpts: called with bogus options
pxa_sd_wait_response: card removed (cmd=07)
pxa_sd_wait_id_response: card removed (cmd=07)
pxa_sd_wait_id_response: card removed (cmd=07)
SD Driver Initialized.
sharp_mmcsd 0.19 04 Jul 2002
usbdm: usbd_monitor 0.3 034 2002-06-12 20:00
monitor_connected: 1
monitor_load:
monitor_hotplug: agent: usbd interface: monitor action: load
usbdcore: usbdcore 0.1 034 2002-06-12 20:00 (dbg="")
net_fd 0.1 034 2002-06-12 20:00 (dbg="",alwaysup=0,OUT=64,IN=64)
vendorID: 4dd productID: 8005
pxa_bi 0.1-alpha 034 2002-06-12 20:00 (dbg="")
bi_modinit: call udc_startup_events
bi_device_event: call udc_enable
bi_device_event: call udc_all_interrupts
monitor_modinit: finished

SL-B500 の dmesg

SL-B500 の dmesg は募集中です。

SL-C700 の dmesg

SL-C700 の dmesg です。ダウンロード(SL-C700 の dmesg)


Linux version 2.4.18-rmk7-pxa3-embedix-021129 (takenaka@TAKENAKA-DELL) (gcc version 2.95.2 19991024 (release)) #1 Mon, 27 Jan 2003 13:54:24 +0900
CPU: Intel XScale-PXA250 revision 4
Machine: SHARP Corgi
Converting old-style param struct to taglist
Memory clock: 99.53MHz (*27)
Run Mode clock: 199.07MHz (*2)
Turbo Mode clock: 398.13MHz (*2.0, active)
Security risk: creating user accessible mapping for 0x08000000 at 0xf1000000
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 mtdparts=sharpsl-nand:7168k@0k(smf),25600k@7168k(root),-(home) jffs2_orphaned_inodes=delete
Console: colour dummy device 80x30
Calibrating delay loop... 397.31 BogoMIPS
Memory: 32MB = 32MB total
Memory: 29776KB available (1807K code, 519K data, 108K init)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
RCSR = 2
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.14)
FCS : CCCR = 241
batok installed
Starting kswapd
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications AB.
reset resolution unkown => 480x640
Console: switching to colour frame buffer device 80x30
fb0: W100FB frame buffer device
keyboard initilaized.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
SharpSL serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0xf8100000x (irq = 14) is a 16550A
ttyS01 at 0xf8700000x (irq = 12) is a 16550A, using IRDA
ttyS02 at 0xf8200000x (irq = 13) is a 16550A
rs_init: IRDA H/W initializaion
sharpled_init: done.
corgi remote controller
Cotulla Real Time Clock driver v1.00
Cotulla Touch Screen driver initialized
block: 64 slots per queue, batch=16
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
loop: loaded (max 8 devices)
PPP generic driver version 2.4.1
PPP BSD Compression module registered
ide_cs.c 1.26 1999/11/16 02:10:49 (David Hinds)
Corgi audio driver initialize
Sharp SL series flash device: 1000000 at 0
Using static partision definition
Creating 1 MTD partitions on "sharpsl-flash":
0x00120000-0x007f0000 : "Filesystem"
NAND device: Manufacture ID: 0x98, Chip ID: 0x76 (Toshiba TH58512FT)
Creating 3 MTD partitions on "Toshiba TH58512FT":
0x00000000-0x00700000 : "smf"
0x00700000-0x02000000 : "root"
0x02000000-0x04000000 : "home"
Linux Kernel Card Services 3.1.22
options: [pm]
Intel PXA250/210 PCMCIA (CS release 3.1.22)
pxa_pcmcia_init(0)
pxa_pcmcia_init(1)
orinoco.c 0.12 (David Gibson <hermes@gibson.dropbear.id.au> and others)
hermes.c: 7 Jun 2002 David Gibson <hermes@gibson.dropbear.id.au>
orinoco_cs.c 0.12 (David Gibson <hermes@gibson.dropbear.id.au> and others)
spectrum_cs.c 0.3.4
Backlight Driver Initialized.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 2048)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
IrCOMM protocol (Dag Brattli)
cramfs: wrong magic
FAT: bogus logical sector size 480
VFS: Mounted root (jffs2 filesystem) readonly.
Freeing init memory: 108K
Inode #3688 was a directory with children - removing those too...
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_id_response: card removed (cmd=00)
pxa_sd_wait_id_response: card removed (cmd=00)
SD Driver Initialized.
sharp_mmcsd 0.21 27 Sep 2002
usbdm: usbd_monitor 0.3 035 2002-06-12 20:00
monitor_connected: 1
monitor_load:
monitor_hotplug: agent: usbd interface: monitor action: load
usbdcore: usbdcore 0.1 035 2002-06-12 20:00 (dbg="")
net_fd 0.1 035 2002-06-12 20:00 (dbg="",alwaysup=0,OUT=64,IN=64)
vendorID: 4dd productID: 8007
pxa_bi 0.1-alpha 035 2002-06-12 20:00 (dbg="")
bi_modinit: call udc_startup_events
bi_device_event: call udc_enable
bi_device_event: call udc_all_interrupts
monitor_modinit: finished

SL-C750 の dmesg

SL-C750 の dmesg です。ダウンロード(SL-C750 の dmesg)


Linux version 2.4.18-rmk7-pxa3-embedix-021129 (zaurus@sharplinux) (gcc version 2.95.2 19991024 (release)) #1 Sat, 10 May 2003 14:51:36 +0900
CPU: Intel XScale-PXA255 revision 6
Machine: SHARP Shepherd
Converting old-style param struct to taglist
Memory clock: 99.53MHz (*27)
Run Mode clock: 199.07MHz (*2)
Turbo Mode clock: 398.13MHz (*2.0, active)
Security risk: creating user accessible mapping for 0x08000000 at 0xf1000000
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 mtdparts=sharpsl-nand:7168k@0k(smf),25600k@7168k(root),-(home) jffs2_orphaned_inodes=delete LOGO=1 LAUNCH=q
Console: colour dummy device 80x30
Calibrating delay loop... 397.31 BogoMIPS
Memory: 64MB = 64MB total
Memory: 62012KB available (1824K code, 520K data, 108K init)
Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
RCSR = 5
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.14)
FCS : CCCR = 161
batok installed
Starting kswapd
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications AB.
reset resolution unkown => 480x640
Console: switching to colour frame buffer device 80x30
fb0: W100FB frame buffer device
keyboard initilaized.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
SharpSL serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0xf8100000x (irq = 14) is a 16550A
ttyS01 at 0xf8700000x (irq = 12) is a 16550A, using IRDA
ttyS02 at 0xf8200000x (irq = 13) is a 16550A
rs_init: IRDA H/W initializaion
sharpled_init: done.
corgi remote controller
Cotulla Real Time Clock driver v1.00
Cotulla Touch Screen driver initialized
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
loop: loaded (max 8 devices)
PPP generic driver version 2.4.1
PPP BSD Compression module registered
ide_cs.c 1.26 1999/11/16 02:10:49 (David Hinds)
Corgi audio driver initialize
Sharp SL series flash device: 1000000 at 0
Using static partision definition
Creating 1 MTD partitions on "sharpsl-flash":
0x00120000-0x007f0000 : "Filesystem"
NAND device: Manufacture ID: 0x98, Chip ID: 0x76 (Toshiba TH58512FT)
Creating 3 MTD partitions on "Toshiba TH58512FT":
0x00000000-0x00700000 : "smf"
0x00700000-0x02000000 : "root"
0x02000000-0x04000000 : "home"
Linux Kernel Card Services 3.1.22
options: [pm]
Intel PXA250/210 PCMCIA (CS release 3.1.22)
pxa_pcmcia_init(0)
pxa_pcmcia_init(1)
orinoco.c 0.12 (David Gibson <hermes@gibson.dropbear.id.au> and others)
hermes.c: 7 Jun 2002 David Gibson <hermes@gibson.dropbear.id.au>
orinoco_cs.c 0.12 (David Gibson <hermes@gibson.dropbear.id.au> and others)
spectrum_cs.c 0.3.4
Backlight Driver Initialized.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
IrCOMM protocol (Dag Brattli)
cramfs: wrong magic
FAT: bogus logical sector size 480
VFS: Mounted root (jffs2 filesystem) readonly.
Freeing init memory: 108K
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_id_response: card removed (cmd=00)
pxa_sd_wait_id_response: card removed (cmd=00)
SD Driver Initialized.
sharp_mmcsd 0.21 27 Sep 2002
usbdm: usbd_monitor 0.3 035 2002-06-12 20:00
monitor_connected: 1
monitor_load:
monitor_hotplug: agent: usbd interface: monitor action: load
usbdcore: usbdcore 0.1 035 2002-06-12 20:00 (dbg="")
net_fd 0.1 035 2002-06-12 20:00 (dbg="",alwaysup=0,OUT=64,IN=64)
vendorID: 4dd productID: 9031
pxa_bi 0.1-alpha 035 2002-06-12 20:00 (dbg="")
bi_modinit: call udc_startup_events
bi_device_event: call udc_enable
bi_device_event: call udc_all_interrupts
monitor_modinit: finished

SL-C760 の dmesg

SL-C760 の dmesg です。ダウンロード(SL-C760 の dmesg)


Linux version 2.4.18-rmk7-pxa3-embedix-021129 (zaurus@sharplinux) (gcc version 2.95.2 19991024 (release)) #1 Wed, 11 Jun 2003 15:07:06 +0900
CPU: Intel XScale-PXA255 revision 6
Machine: SHARP Shepherd
Converting old-style param struct to taglist
Memory clock: 99.53MHz (*27)
Run Mode clock: 199.07MHz (*2)
Turbo Mode clock: 398.13MHz (*2.0, active)
Security risk: creating user accessible mapping for 0x08000000 at 0xf1000000
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 mtdparts=sharpsl-nand:7168k@0k(smf),54272k@7168k(root),-(home) jffs2_orphaned_inodes=delete LOGO=1 LAUNCH=q
Console: colour dummy device 80x30
Calibrating delay loop... 397.31 BogoMIPS
Memory: 64MB = 64MB total
Memory: 62012KB available (1824K code, 520K data, 108K init)
Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
RCSR = 2
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.14)
FCS : CCCR = 161
batok installed
Starting kswapd
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications AB.
reset resolution unkown => 480x640
Console: switching to colour frame buffer device 80x30
fb0: W100FB frame buffer device
keyboard initilaized.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
SharpSL serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0xf8100000x (irq = 14) is a 16550A
ttyS01 at 0xf8700000x (irq = 12) is a 16550A, using IRDA
ttyS02 at 0xf8200000x (irq = 13) is a 16550A
rs_init: IRDA H/W initializaion
sharpled_init: done.
corgi remote controller
Cotulla Real Time Clock driver v1.00
Cotulla Touch Screen driver initialized
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
loop: loaded (max 8 devices)
PPP generic driver version 2.4.1
PPP BSD Compression module registered
ide_cs.c 1.26 1999/11/16 02:10:49 (David Hinds)
Corgi audio driver initialize
Sharp SL series flash device: 1000000 at 0
Using static partision definition
Creating 1 MTD partitions on "sharpsl-flash":
0x00120000-0x007f0000 : "Filesystem"
NAND device: Manufacture ID: 0xec, Chip ID: 0x79 (Samsung K9D1G08V0M)
Creating 3 MTD partitions on "Samsung K9D1G08V0M":
0x00000000-0x00700000 : "smf"
0x00700000-0x03c00000 : "root"
0x03c00000-0x08000000 : "home"
Linux Kernel Card Services 3.1.22
options: [pm]
Intel PXA250/210 PCMCIA (CS release 3.1.22)
pxa_pcmcia_init(0)
pxa_pcmcia_init(1)
orinoco.c 0.12 (David Gibson <hermes@gibson.dropbear.id.au> and others)
hermes.c: 7 Jun 2002 David Gibson <hermes@gibson.dropbear.id.au>
orinoco_cs.c 0.12 (David Gibson <hermes@gibson.dropbear.id.au> and others)
spectrum_cs.c 0.3.4
Backlight Driver Initialized.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
IrCOMM protocol (Dag Brattli)
cramfs: wrong magic
FAT: bogus logical sector size 480
VFS: Mounted root (jffs2 filesystem) readonly.
Freeing init memory: 108K
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_id_response: card removed (cmd=00)
pxa_sd_wait_id_response: card removed (cmd=00)
SD Driver Initialized.
sharp_mmcsd 0.21 27 Sep 2002
usbdm: usbd_monitor 0.3 035 2002-06-12 20:00
monitor_connected: 1
monitor_load:
monitor_hotplug: agent: usbd interface: monitor action: load
usbdcore: usbdcore 0.1 035 2002-06-12 20:00 (dbg="")
net_fd 0.1 035 2002-06-12 20:00 (dbg="",alwaysup=0,OUT=64,IN=64)
vendorID: 4dd productID: 9031
pxa_bi 0.1-alpha 035 2002-06-12 20:00 (dbg="")
bi_modinit: call udc_startup_events
bi_device_event: call udc_enable
bi_device_event: call udc_all_interrupts
monitor_modinit: finished

SL-C860 の dmesg

SL-C860 の dmesg は募集中です。

SL-C1000 の dmesg

SL-C1000 の dmesg です。ダウンロード(SL-C1000 の dmesg)


Linux version 2.4.20 (namikosi@mascaras) (gcc version 2.95.2 19991024 (release)) #1 Mon, 28 Feb 2005 19:44:25 +0900
CPU: XScale-PXA270 revision 4
Machine: SHARP Akita
Converting old-style param struct to taglist
Ignoring unrecognised tag 0x00000000
Turbo Mode clock : 416.00MHz (*2.0, active)
Run Mode clock : 208.00MHz
System bus clock : 208.00MHz (1/1)
Memory clock : 208.00MHz (1/1)
LCD clock : 104.00MHz (1/2)
Security risk: creating user accessible mapping for 0x08000000 at 0xf1000000
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 mtdparts=sharpsl-nand:7168k@0k(smf),59392k@7168k(root),-(home) jffs2_orphaned_inodes=delete EQUIPMENT=0 LOGOLANG=1 DEFYEAR=2006 LOGO=1 LAUNCH=q
Console: colour dummy device 80x30
Calibrating delay loop... 415.33 BogoMIPS
Memory: 64MB = 64MB total
Memory: 61988KB available (2119K code, 558K data, 112K init)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
RCSR = 8
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.14)
FCS : CCCR = 2000210
enable_irq(120) unbalanced from c000c6f8
batok installed
Starting kswapd
Journalled Block Device driver loaded
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications AB.
Sharp SL-Series PXA fb driver initialized.
reset resolution unkown => 480x640
Console: switching to colour frame buffer device 80x30
fb0: SHARPSL_PXAFB frame buffer device
keyboard initilaized.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
SharpSL serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0xf8100000x (irq = 22) is a 16550A
ttyS01 at 0xf8700000x (irq = 20) is a 16550A, using IRDA
ttyS02 at 0xf8200000x (irq = 21) is a 16550A
rs_init: IRDA H/W initializaion
sharpled_init: done.
xxxx remote controller
Cotulla Real Time Clock driver v1.00
Cotulla Touch Screen driver initialized
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
PPP BSD Compression module registered
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Spitz audio driver initialize
Sharp SL series flash device: 1000000 at 0
Using static partision definition
Creating 1 MTD partitions on "sharpsl-flash":
0x00140000-0x007f0000 : "Filesystem"
NAND device: Manufacture ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MB 3,3V)
Creating 3 MTD partitions on "NAND 128MB 3,3V":
0x00000000-0x00700000 : "smf"
0x00700000-0x04100000 : "root"
0x04100000-0x08000000 : "home"
Linux Kernel Card Services 3.1.31
options: [pm]
Intel PXA250/210 PCMCIA (CS release 3.1.31)
pxa_pcmcia_init(0)
pxa_pcmcia_init(1)
orinoco.c 0.11b (David Gibson <hermes@gibson.dropbear.id.au> and others)
hermes.c: 5 Apr 2002 David Gibson <hermes@gibson.dropbear.id.au>
orinoco_cs.c 0.11b (David Gibson <hermes@gibson.dropbear.id.au> and others)
spectrum_cs.c 0.3.4
Backlight Driver Initialized.
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
IrCOMM protocol (Dag Brattli)
cramfs: wrong magic
FAT: bogus logical sector size 480
VFS: Mounted root (jffs2 filesystem) readonly.
Freeing init memory: 112K
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_id_response: card removed (cmd=00)
SD Driver Initialized.
sharp_mmcsd 0.30 13 Oct 2004
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_id_response: card removed (cmd=00)
set_wakeup_src=ae000019->ae000019[9801a003]
usbh: udc_connected: ACTIVE_LOW: 0<7>usbh: monitor_connected: 0
usbh: monitor_unload: 0
usbh: monitor_hotplug: agent: usbh interface: monitor action: unload
usbh: monitor_request_irq: 41 71
usbh: monitor_modinit: finished
usbdm: usbd_monitor 0.3 035 2002-06-12 20:00
monitor_connected: 1
monitor_load:
monitor_hotplug: agent: usbd interface: monitor action: load
usbh: udc_connected: ACTIVE_LOW: 0<7>usbh: monitor_connected: 0
usbh: monitor_unload: 4
usbdcore: usbdcore 0.1 035 2002-06-12 20:00 (dbg="")
net_fd 0.1 035 2002-06-12 20:00 (dbg="",alwaysup=0,OUT=64,IN=64)
vendorID: 4dd productID: 9031
pxa27x_bi 0.1-alpha 035 2002-06-12 20:00 (dbg="")
bi_modinit: call udc_startup_events
bi_device_event: call udc_enable
bi_device_event: call udc_all_interrupts
udc_connect: usb-device is not active.
monitor_modinit: finished

SL-C3000 の dmesg

SL-C3000 の dmesg です。ダウンロード(SL-C3000 の dmesg)


Linux version 2.4.20 (namikosi@mascaras) (gcc version 2.95.2 19991024 (release)) #1 Thu, 28 Oct 2004 09:59:43 +0900
CPU: XScale-PXA270 revision 4
Machine: SHARP Spitz
Converting old-style param struct to taglist
Ignoring unrecognised tag 0x00000000
Turbo Mode clock : 416.00MHz (*2.0, active)
Run Mode clock : 208.00MHz
System bus clock : 208.00MHz (1/1)
Memory clock : 208.00MHz (1/1)
LCD clock : 104.00MHz (1/2)
Security risk: creating user accessible mapping for 0x08000000 at 0xf1000000
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 mtdparts=sharpsl-nand:7168k@0k(smf),5120k@7168k(root),-(home) jffs2_orphaned_inodes=delete RTC_RESET=1 EQUIPMENT=4 LOGOLANG=1 DEFYEAR=2005 LOGO=1 LAUNCH=q
Console: colour dummy device 80x30
Calibrating delay loop... 415.33 BogoMIPS
Memory: 64MB = 64MB total
Memory: 61996KB available (2116K code, 553K data, 112K init)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
RCSR = 4
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.14)
FCS : CCCR = 2000210
enable_irq(120) unbalanced from c000c6e0
batok installed
Starting kswapd
Journalled Block Device driver loaded
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications AB.
Sharp SL-Series PXA fb driver initialized.
reset resolution unkown => 480x640
Console: switching to colour frame buffer device 80x30
fb0: SHARPSL_PXAFB frame buffer device
keyboard initilaized.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
SharpSL serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0xf8100000x (irq = 22) is a 16550A
ttyS01 at 0xf8700000x (irq = 20) is a 16550A, using IRDA
ttyS02 at 0xf8200000x (irq = 21) is a 16550A
rs_init: IRDA H/W initializaion
sharpled_init: done.
spitz remote controller
Cotulla Real Time Clock driver v1.00
Cotulla Touch Screen driver initialized
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
PPP BSD Compression module registered
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Spitz audio driver initialize
Sharp SL series flash device: 1000000 at 0
Using static partision definition
Creating 1 MTD partitions on "sharpsl-flash":
0x00140000-0x007f0000 : "Filesystem"
NAND device: Manufacture ID: 0xec, Chip ID: 0x73 (Samsung NAND 16MB 3,3V)
Creating 3 MTD partitions on "NAND 16MB 3,3V":
0x00000000-0x00700000 : "smf"
0x00700000-0x00c00000 : "root"
0x00c00000-0x01000000 : "home"
Linux Kernel Card Services 3.1.31
options: [pm]
Intel PXA250/210 PCMCIA (CS release 3.1.31)
pxa_pcmcia_init(0)
pxa_pcmcia_init(1)
orinoco.c 0.11b (David Gibson <hermes@gibson.dropbear.id.au> and others)
hermes.c: 5 Apr 2002 David Gibson <hermes@gibson.dropbear.id.au>
orinoco_cs.c 0.11b (David Gibson <hermes@gibson.dropbear.id.au> and others)
spectrum_cs.c 0.3.4
Backlight Driver Initialized.
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
IrCOMM protocol (Dag Brattli)
cramfs: wrong magic
FAT: bogus logical sector size 480
VFS: Mounted root (jffs2 filesystem) readonly.
Freeing init memory: 112K
jffs2_scan_inode_node(): CRC failed on node at 0x003b9de8: Read 0xffffffff, calculated 0x8e39a64f
Trying to free nonexistent resource <f7000000-f700000f>
hda: HMS360404D5CF00, ATA DISK drive
ide0 at 0xf7000000-0xf7000007,0xf700000e on irq 136
hda: 7999488 sectors (4096 MB) w/128KiB Cache, CHS=7936/16/63
Partition check:
hda: hda1 hda2 hda3
ide_cs: hda: Vcc = 3.3, Vpp = 0.0
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
MSDOS FS: IO charset utf8
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_id_response: card removed (cmd=00)
SD Driver Initialized.
sharp_mmcsd 0.30 13 Oct 2004
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_id_response: card removed (cmd=00)
set_wakeup_src=ae000019->ae000019[9801a003]
usbh: udc_connected: ACTIVE_LOW: 0<7>usbh: monitor_connected: 0
usbh: monitor_unload: 0
usbh: monitor_hotplug: agent: usbh interface: monitor action: unload
usbh: monitor_request_irq: 41 71
usbh: monitor_modinit: finished
usbh: udc_connected: ACTIVE_LOW: 0<7>usbh: monitor_connected: 0
usbh: monitor_unload: 4
usbdm: usbd_monitor 0.3 035 2002-06-12 20:00
monitor_connected: 1
monitor_load:
monitor_hotplug: agent: usbd interface: monitor action: load
usbdcore: usbdcore 0.1 035 2002-06-12 20:00 (dbg="")
storage_fd: storage_fd 0.1 035 2002-06-12 20:00 (OUT=64,IN=64)
storage_fd: vendorID: 4dd productID: 9050
pxa27x_bi 0.1-alpha 035 2002-06-12 20:00 (dbg="")
bi_modinit: call udc_startup_events
bi_device_event: call udc_enable
bi_device_event: call udc_all_interrupts
udc_connect: usb-device is not active.
monitor_modinit: finished

SL-C3100 の dmesg

SL-C3100 の dmesg です。ダウンロード(SL-C3100 の dmesg)


Linux version 2.4.20 (namikosi@mascaras) (gcc version 2.95.2 19991024 (release)) #1 Thu, 14 Apr 2005 11:19:41 +0900
CPU: XScale-PXA270 revision 4
Machine: SHARP Borzoi
Converting old-style param struct to taglist
Ignoring unrecognised tag 0x00000000
Turbo Mode clock : 416.00MHz (*2.0, active)
Run Mode clock : 208.00MHz
System bus clock : 208.00MHz (1/1)
Memory clock : 208.00MHz (1/1)
LCD clock : 104.00MHz (1/2)
Security risk: creating user accessible mapping for 0x08000000 at 0xf1000000
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 mtdparts=sharpsl-nand:7168k@0k(smf),32768k@7168k(root),-(home) jffs2_orphaned_inodes=delete EQUIPMENT=4 LOGOLANG=1 DEFYEAR=2006 LOGO=1 LAUNCH=q
Console: colour dummy device 80x30
Calibrating delay loop... 415.33 BogoMIPS
Memory: 64MB = 64MB total
Memory: 61988KB available (2120K code, 557K data, 112K init)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
RCSR = 8
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.14)
FCS : CCCR = 2000210
enable_irq(120) unbalanced from c000c6e0
batok installed
Starting kswapd
Journalled Block Device driver loaded
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications AB.
Sharp SL-Series PXA fb driver initialized.
reset resolution unkown => 480x640
Console: switching to colour frame buffer device 80x30
fb0: SHARPSL_PXAFB frame buffer device
keyboard initilaized.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
SharpSL serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0xf8100000x (irq = 22) is a 16550A
ttyS01 at 0xf8700000x (irq = 20) is a 16550A, using IRDA
ttyS02 at 0xf8200000x (irq = 21) is a 16550A
rs_init: IRDA H/W initializaion
sharpled_init: done.
spitz remote controller
Cotulla Real Time Clock driver v1.00
Cotulla Touch Screen driver initialized
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
PPP BSD Compression module registered
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Spitz audio driver initialize
Sharp SL series flash device: 1000000 at 0
Using static partision definition
Creating 1 MTD partitions on "sharpsl-flash":
0x00140000-0x007f0000 : "Filesystem"
NAND device: Manufacture ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MB 3,3V)
Creating 3 MTD partitions on "NAND 128MB 3,3V":
0x00000000-0x00700000 : "smf"
0x00700000-0x02700000 : "root"
0x02700000-0x08000000 : "home"
Linux Kernel Card Services 3.1.31
options: [pm]
Intel PXA250/210 PCMCIA (CS release 3.1.31)
pxa_pcmcia_init(0)
pxa_pcmcia_init(1)
orinoco.c 0.11b (David Gibson and others)
hermes.c: 5 Apr 2002 David Gibson
orinoco_cs.c 0.11b (David Gibson and others)
spectrum_cs.c 0.3.4
Backlight Driver Initialized.
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
IrCOMM protocol (Dag Brattli)
cramfs: wrong magic
FAT: bogus logical sector size 480
VFS: Mounted root (jffs2 filesystem) readonly.
Freeing init memory: 112K
Trying to free nonexistent resource
hda: HMS360404D5CF00, ATA DISK drive
ide0 at 0xf7000000-0xf7000007,0xf700000e on irq 136
hda: 7999488 sectors (4096 MB) w/128KiB Cache, CHS=7936/16/63
Partition check:
hda: hda1 hda2 hda3
ide_cs: hda: Vcc = 3.3, Vpp = 0.0
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
MSDOS FS: IO charset utf8
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_id_response: card removed (cmd=00)
SD Driver Initialized.
sharp_mmcsd 0.30 13 Oct 2004
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_id_response: card removed (cmd=00)
set_wakeup_src=ae000019->ae000019[9801a003]
usbh: udc_connected: ACTIVE_LOW: 0<7>usbh: monitor_connected: 0
usbh: monitor_unload: 0
usbh: monitor_hotplug: agent: usbh interface: monitor action: unload
usbh: monitor_request_irq: 41 71
usbh: monitor_modinit: finished
usbh: udc_connected: ACTIVE_LOW: 0<7>usbh: monitor_connected: 0
usbh: monitor_unload: 4
usbdm: usbd_monitor 0.3 035 2002-06-12 20:00
monitor_connected: 1
monitor_load:
monitor_hotplug: agent: usbd interface: monitor action: load
usbdcore: usbdcore 0.1 035 2002-06-12 20:00 (dbg="")
storage_fd: storage_fd 0.1 035 2002-06-12 20:00 (OUT=64,IN=64)
storage_fd: vendorID: 4dd productID: 9050
pxa27x_bi 0.1-alpha 035 2002-06-12 20:00 (dbg="")
bi_modinit: call udc_startup_events
bi_device_event: call udc_enable
bi_device_event: call udc_all_interrupts
udc_connect: usb-device is not active.
monitor_modinit: finished

SL-C3200 の dmesg

SL-C3200 の dmesg です。ダウンロード(SL-C3200 の dmesg)


Linux version 2.4.20 (yasui@iwamoto-del) (gcc version 2.95.2 19991024 (release)) #1 Fri, 3 Feb 2006 16:34:13 +0900
CPU: XScale-PXA270 revision 7
Machine: SHARP Terrier
Converting old-style param struct to taglist
Ignoring unrecognised tag 0x00000000
Turbo Mode clock : 416.00MHz (*2.0, active)
Run Mode clock : 208.00MHz
System bus clock : 208.00MHz (1/1)
Memory clock : 208.00MHz (1/1)
LCD clock : 104.00MHz (1/2)
Security risk: creating user accessible mapping for 0x08000000 at 0xf1000000
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/mtdblock2 mtdparts=sharpsl-nand:7168k@0k(smf),44032k@7168k(root),-(home) jffs2_orphaned_inodes=delete EQUIPMENT=5 LOGOLANG=1 DEFYEAR=2007 LOGO=1 LAUNCH=q
Console: colour dummy device 80x30
Calibrating delay loop... 415.33 BogoMIPS
Memory: 64MB = 64MB total
Memory: 61988KB available (2121K code, 556K data, 112K init)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
RCSR = 12
apm: BIOS version 1.2 Flags 0x02 (Driver version 1.14)
FCS : CCCR = 2000210
enable_irq(120) unbalanced from c000c6f0
batok installed
Starting kswapd
Journalled Block Device driver loaded
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications AB.
Sharp SL-Series PXA fb driver initialized.
reset resolution unkown => 480x640
Console: switching to colour frame buffer device 80x30
fb0: SHARPSL_PXAFB frame buffer device
keyboard initilaized.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
SharpSL serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0xf8100000x (irq = 22) is a 16550A
ttyS01 at 0xf8700000x (irq = 20) is a 16550A, using IRDA
ttyS02 at 0xf8200000x (irq = 21) is a 16550A
rs_init: IRDA H/W initializaion
sharpled_init: done.
spitz remote controller
Cotulla Real Time Clock driver v1.00
Cotulla Touch Screen driver initialized
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
PPP BSD Compression module registered
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Spitz audio driver initialize
Sharp SL series flash device: 1000000 at 0
Using static partision definition
Creating 1 MTD partitions on "sharpsl-flash":
0x00140000-0x007f0000 : "Filesystem"
NAND device: Manufacture ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MB 3,3V)
Creating 3 MTD partitions on "NAND 128MB 3,3V":
0x00000000-0x00700000 : "smf"
0x00700000-0x03200000 : "root"
0x03200000-0x08000000 : "home"
Linux Kernel Card Services 3.1.31
options: [pm]
Intel PXA250/210 PCMCIA (CS release 3.1.31)
pxa_pcmcia_init(0)
pxa_pcmcia_init(1)
orinoco.c 0.11b (David Gibson <hermes@gibson.dropbear.id.au> and others)
hermes.c: 5 Apr 2002 David Gibson <hermes@gibson.dropbear.id.au>
orinoco_cs.c 0.11b (David Gibson <hermes@gibson.dropbear.id.au> and others)
spectrum_cs.c 0.3.4
Backlight Driver Initialized.
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
IrCOMM protocol (Dag Brattli)
cramfs: wrong magic
FAT: bogus logical sector size 480
VFS: Mounted root (jffs2 filesystem) readonly.
Freeing init memory: 112K
Trying to free nonexistent resource <f7000000-f700000f>
hda: HMS360606D5CF00, ATA DISK drive
ide0 at 0xf7000000-0xf7000007,0xf700000e on irq 136
hda: 12000556 sectors (6144 MB) w/128KiB Cache, CHS=11905/16/63
Partition check:
hda: hda1 hda2 hda3
ide_cs: hda: Vcc = 3.3, Vpp = 0.0
hda: hda1 hda2 hda3
hda: hda1 hda2 hda3
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
MSDOS FS: IO charset utf8
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_id_response: card removed (cmd=00)
SD Driver Initialized.
sharp_mmcsd 0.30 13 Oct 2004
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_response: card removed (cmd=00)
pxa_sd_wait_id_response: card removed (cmd=00)
set_wakeup_src=ae000019->ae000019[9801a003]
usbh: udc_connected: ACTIVE_LOW: 0<7>usbh: monitor_connected: 0
usbh: monitor_unload: 0
usbh: monitor_hotplug: agent: usbh interface: monitor action: unload
usbh: monitor_request_irq: 41 71
usbh: monitor_modinit: finished
usbh: udc_connected: ACTIVE_LOW: 0<7>usbh: monitor_connected: 0
usbh: monitor_unload: 4
usbdm: usbd_monitor 0.3 035 2002-06-12 20:00
monitor_connected: 1
monitor_load:
monitor_hotplug: agent: usbd interface: monitor action: load
usbdcore: usbdcore 0.1 035 2002-06-12 20:00 (dbg="")
storage_fd: storage_fd 0.1 035 2002-06-12 20:00 (OUT=64,IN=64)
storage_fd: vendorID: 4dd productID: 9050
pxa27x_bi 0.1-alpha 035 2002-06-12 20:00 (dbg="")
bi_modinit: call udc_startup_events
bi_device_event: call udc_enable
bi_device_event: call udc_all_interrupts
udc_connect: usb-device is not active.
monitor_modinit: finished

debian 化した SL-C3000の dmesg

SL-C3000 の dmesg(debian GNU Linux 4.0) です。ダウンロード(SL-C3000 の dmesg)


Linux version 2.6.21.7 (tsuyoshi@terra) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #10 PREEMPT Tue Oct 9 22:26:27 JST 2007
CPU: XScale-PXA270 [69054114] revision 4 (ARMv5TE), cr=0000397f
Machine: SHARP Spitz
Ignoring unrecognised tag 0x00000000
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 16384
DMA zone: 128 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 16256 pages, LIFO batch:3
Normal zone: 0 pages used for memmap
Run Mode clock: 208.00MHz (*16)
Turbo Mode clock: 416.00MHz (*2.0, active)
Memory clock: 208.00MHz (/2)
System bus clock: 208.00MHz
CPU0: D VIVT undefined 5 cache
CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Built 1 zonelists. Total pages: 16256
Kernel command line: console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/hda1 rw rootfstype=ext3 fbcon=rotate:1
PID hash table entries: 256 (order: 8, 1024 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 64MB = 64MB total
Memory: 62208KB available (2444K code, 188K data, 80K init)
Calibrating delay loop... 415.33 BogoMIPS (lpj=2076672)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
Sharp Scoop Device found at 0x10800000 -> 0xc4800000
Sharp Scoop Device found at 0x08800040 -> 0xc4802040
Time: pxa_timer clocksource has been installed.
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NetWinder Floating Point Emulator V0.97 (double precision)
JFFS2 version 2.2. (NAND) (SUMMARY) (C) 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Corgi Backlight Driver Initialized.
Console: switching to colour frame buffer device 80x30
pccard: PCMCIA card inserted into slot 0
pcmcia: registering new device pcmcia0.0
pxa2xx-uart.0: ttyS0 at MMIO 0x40100000 (irq = 22) is a FFUART
pxa2xx-uart.1: ttyS1 at MMIO 0x40200000 (irq = 21) is a BTUART
pxa2xx-uart.2: ttyS2 at MMIO 0x40700000 (irq = 20) is a STUART
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
Sharp SL series flash device: 800000 at 0
Using static partision definition
Creating 1 MTD partitions on "sharpsl-flash":
0x00140000-0x007f0000 : "Boot PROM Filesystem"
NAND device: Manufacturer ID: 0xec, Chip ID: 0x73 (Samsung NAND 16MiB 3,3V 8-bit)
Scanning device for bad blocks
Creating 3 MTD partitions on "sharpsl-nand":
0x00000000-0x00700000 : "System Area"
pccard: PCMCIA card inserted into slot 1
pcmcia: registering new device pcmcia1.0
0x00700000-0x00c00000 : "Root Filesystem"
0x00c00000-0x01000000 : "Home Filesystem"
input: Spitz Keyboard as /class/input/input0
input: Corgi Touchscreen as /class/input/input1
I2C: i2c-0: PXA I2C adapter
I2C: i2c-1: PXA I2C adapter
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
XScale iWMMXt coprocessor detected.
Probing IDE interface ide0...
mmcblk0: mmc0:86bf SK512 483840KiB
mmcblk0: p1
hda: HMS360606D5CF00, CFA DISK drive
ide0 at 0xc4840000-0xc4840007,0xc484000e on irq 138
hda: max request size: 128KiB
hda: 12000556 sectors (6144 MB) w/128KiB Cache, CHS=11905/16/63
hda: cache flushes supported
hda: hda1 hda2 hda3
ide-cs: hda: Vpp = 0.0
kjournald starting. Commit interval 5 seconds
EXT3-fs warning: mounting fs with errors, running e2fsck is recommended
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem).
Freeing init memory: 80K
mice: PS/2 mouse device common for all mice
pcmcia: request for exclusive IRQ could not be fulfilled.
pcmcia: the driver needs updating to supported shared IRQ lines.
eth0: NE2000 Compatible: io 0xc4820300, irq 137, hw_addr 00:07:40:FB:AF:2E
Adding 103816k swap on /dev/hda3. Priority:-1 extents:1 across:103816k
EXT3-fs warning: mounting fs with errors, running e2fsck is recommended
EXT3 FS on hda1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NET: Registered protocol family 10
eth0: no IPv6 routers present